FORNO Fireplace Digna XL CortenSteel

Reviews
IN STOCK, available now
I also would like to receive:
Burni Stig BGS1 corten
FORNO Fireplace Digna XL CortenSteel
  • All products are for the European market
  • Ordered before 17.00h, SAME DAY shipment
  • 14 day reflection period
  • Pay later

FORNO is a Dutch company with a small team of professionals engaged in the design and manufacture of garden fireplaces, fire bowls and fire tables. Hand-made, with the greatest care for design and quality. At FORNO, everything is about pure craftsmanship!


All FORNO products are of an outstanding quality. You will enjoy them for years. Whether it's a fire table, a patio fireplace or a fire bowl, all models are made of no less than 3 mm thick corten steel. To sum it up; With the stylish FORNO products, you choose special design and high quality. 


FORNO Fireplace Digna XL CortenSteel


Are you looking for a beautiful outdoor fireplace made from CortenSteel? Then this stylish FORNO garden fire Digna XL might be just what you are looking for!


The Digna patio fire from FORNO is an outdoor fire of the very highest quality. The fire is made from 3 mm thick CortenSteel and is double-walled. In terms of design, the FORNO outdoor fireplaces can be called quirky, timeless and unique. The Digna has 4 viewing sides, so everyone can enjoy the beautiful play of fire. Even when you are not using the fireplace, it is an asset to your garden.


A feast for the eyes and practical to use


The FORNO Digna garden fire has a unique design with beautiful, straight forms and is fitted with a handy storage compartment for your fire logs. This is not only beautiful to look at, but also extremely practical. You have your firewood at hand and don't have to move it around all the time. 

The combustion part of the fireplace is somewhat higher than in other garden fireplaces. Due to this height, the moving flames are clearly visible and the FORNO Digna gives off even more cosy heat. 


The latter also applies to a stove pipe. You must order these separately. They are available in three sizes (length 50, 75 and 100 cm). In addition, FORNO offers the possibility to order separate connectors (45 and 90°) with which you can attach the pipe outside of a roof, for example a veranda. Very handy and in this way, a FORNO patio fire can be placed in almost any situation.


Made of no less than 3 mm thick CortenSteel


The FORNO garden fire is made from no less than 3 mm thick CortenSteel. The garden fire can therefore remain outside in all weathers and does not need to be covered. The fireplace is namely made from a copper-bearing type of steel (Corten).


CortenSteel is also known as weather-resistant steel. One of the characteristics of Corten steel is its brown-orange rust colour and its long lifespan. The lifespan is so long because the first layer of corrosion stops further damage by rust so that painting is not necessary and maintenance is very low. The more you use the FORNO Digna, the more beautiful it becomes. In time, the steel will acquire a beautiful, natural patina.


In short; with the Digna garden fire, FORNO has once again come up with an attractive, high-quality fire. Sit down with friends around this fire and enjoy the beautiful design and the warmth that this fire radiates.


FORNO Fireplace Digna CortenSteel XL in short:


-  Atmospheric garden fire with 4 viewing sides
-  Stylish square design
-  Authentic log fire
-  Made of 3 mm thick Corten steel
-  FORNO gives a 5-year full guarantee on all garden heaters.
-  The stove pipe can be ordered separately (as well as a door and fittings of 45 and 90).
-  The FORNO Digna is available in two sizes and two colours: black and rust-coloured (CortenSteel).
 

Logo Forno


 


Please note the following! 


Please note: It can happen that a certain type of CortenSteel fire bowl will not immediately have a rust-look. At first, you might think that the wrong product was delivered. Nothing could be further from the truth. When you place the garden fireplace outside, humidity and/or rain will soon make the first layer of corrosion appear. Often the manufacturer delivers the fireplaces complete with a recognisable corrosion layer, but it also happens that the steel is still smooth and the first "rusting" has yet to appear. But don't worry, this happens very quickly. 


 



 

Read more
Specifications
Brand FORNO
Model Digna XL
Article number BDS1.150
Color (Rusty) brown
Material Corten steel
Dimensions L 50 x W 50 x H 110 cm
Weight 74 Kg
Shape Square
Fuel Wood ( Max. 1.5 kg dry wood at a time)
Warranty 5 years
Thickness steel cone 3 mm
Fire view 4-sided
Reviews
Reviews
All review data
Write a review
Other people also viewed these products
Burni Stig BGS1 corten
0 Reviews
L 50 x W 50 x H 90 cm
High-quality CortenSteel (64 kg)
IN STOCK, available now
Special Price €1,545.00 Regular Price €1,875.00
Burni Stig BGS1 corten
0 Reviews
L 50 x W 50 x H 110 cm
High-quality CortenSteel (74 kg)
IN STOCK, available now
Special Price €2,195.00 Regular Price €2,495.00
FORNO Stig BGS1 corten
8 Reviews
L 50 x W 50 x H 100 cm
High-quality CortenSteel (93 kg)
IN STOCK, available now
Special Price €675.00 Regular Price €999.00