Eurom outdoor heat panel - more info

EUROM OUTDOOR HEAT PANEL

The Heat Strip is an efficient electric heating element which is suitable for indoor and outdoor heating. Just like the sun the heat strip heats indirectly. The highly-efficient shortwave heat rays pass through the air and heat the surfaces of materials and bodies first. These, in turn, give heat to the surrounding air, so that the general surrounding temperature rises.

Ordinary patio heaters only heat the air in the immediate environment so that the heat rises without actually making a difference. Only then are the surroundings heated. This creates a high energy loss. In addition, wind or draught don’t affect the surrounding temperature because heat only forms where needed, directly on the body surface.

An additional advantage is that the Heat Strip doesn’t radiate light like the well-known infrared heaters. The Heat Strip terrace heating is a neutral and pleasing solution for outdoor heating.

EASY TO ASSEMBLY AND INSTALL

Assembly and installation of this patio heater is fairly simple. You can mount the Eurom outdoor heat panel both on the ceiling and the wall. Ensure that the heater is at least 1.8 metres above the ground.

If the patio heater is mounted on the ceiling, keep a minimum distance of 20 centimetres to the walls and 9 centimetres to the ceiling in mind. For wall mounting, it is important that the heater is mounted at least 20 centimetres below the ceiling.
By means of two wall mounts and brackets you can then hang up the patio heater. Read the manual carefully with regard to safety instructions. When everything is ready, you can plug it in and enjoy the wonderful warm temperature.

ENEFITS OF THE HEAT STRIP COMPARED TO TRADITIONAL GAS HEATERS:

• Even heat distribution
• Minimal heat loss
• Prevention of cold radiation by non-heated surfaces
• No heat loss by the wind or draught
• Heat exactly where it’s needed
• Effective heating with reduced energy use
• Optimal use of outdoor terraces
• No exchange of gas cylinders